 |  | 
 
Tuthill Transfer Systems Fill-Rite 13 GPM standard duty 12 VDC # SD1202A fuel transfer pump designed for moderate to heavy use. Self-priming, positive displacement, rotary carbon vanes pump with carbon/ceramic seal and Viton O-ring. Easily mounts to standard 2" FNPT opening on tank or drum. Can be padlocked.
NOT INTENDED FOR PUMPING WATER.
Specifications
- Compatible fluids:
Diesel fuel, gasoline, kerosene, mineral oils, stoddard solvent/heptane
- Includes:
Pump motor with built-in check valve and strainer; Motor with 15 feet power cord; 10 feet 3/4" discharge hose with static ground wire; 3/4" manual aluminum nozzle for unleaded gas; 2 piece polymer suction tube for 15 to 55 gallon drums; 2" NPT bung adapter with clamp
- Mounting:
Mounts to standard 2" FNPT tank or drumopening. Can be padlocked.
- Construction
Die cast alumonum
- Duty cycle:
30 minutes
- Pump Inlet:
1" FNPT
- Pump Outlet:
3/4" FNPT
- Maximum flow rate:
13 GPM
- Maximum outlet pressure:
12 PSI
- Maximum recommended viscosity of pumped fluid:
Diesel fuel
- Maximum ambient operating temperature:
150 °F
- Minimum ambient operating temperature:
-15 °F
- Electrical:
1/4 HP, 20 amps UL, cUL listed, explosion proof, ball bearings, 12 volts, D.C. permanent magnet motor with thermal overload protection.
- Weight:
30 lbs.
|
|