|
Replaced By Pearl by Calpeda Model # JCC 10F16S.Pedrollo cast iron shallow well jet pump 22 GPM 1 HP 115 Volts only # JSW 10F16S. Self priming for up to 25 feet. Includes jet pump , electric motor, pressure switch and gauge. Wt. 33 lbs. Factory wired for 115 volts. |
|
| WellMate Fiberglass Pre-charged 47Gallon Bladder Tank # WM14WB. Equivalent in drawdown to a 140 gallon galvanized atmospheric tank. Connection: 1-1/4" MNPT (Male pipe thread. Carton dimensions: 41" H X 21.5" W X 21.5" L, Weight: 42 lbs. Factory 5 years warranty period for potable water residential installations and 2 years for non-residential installations. UPS Residential Ground Only. 2nd Day Shipments Are Not Available List: $1,061.21 Value Priced $955.25 |
|
| Universal pump mounting kit mounts any jet pump on top of a Wellmate pressure tank. Easy installation with only simple hand tools. Steel plate bracket, 4 rubber mounts, air stem extender, tank mounting clamps with bolts and nuts. List: $127.55 Value Priced $93.00 |
|
| 1" galvanized street priming tee with 1" X 1/4" galvanized reducing bushing and 1/4" Plug. To prime pump remove bushing and plug from top of discharge tee and fill with water until the water overflows from the top of the tee. Once pump is primed reinstall bushing and plug and tighten to seal $999.99 |
|
| 2", 0-100 PSI Steel Pressure, Dry Non-Fillable Gauge # 101D-204, an inexpensive utility gauge for the broad commercial and industrial markets.Suitable for air, water, oil, gas or any other media not corrosive to brass. Use only with water List: $15.45 Value Priced $11.30 |
|
| Pressure relief valve 1/2" heavy duty, no lead, bronze pressure relief valve for shallow, deep well and submersible pumps. Recommended only for cold water system installation. Spring loaded and pre-set at 100 PSI (Not adjustable). Not for use with hot water heaters. List: $44.56 Value Priced $29.25 |
|
| Pressure to operate: Approximately 1 PSI,
Working pressure: Up to 200 PSI,
Overall length: 3-11/16",
Weight:1-1/4 lbs $37.00 |
|
| One piece cast brass body, silicone treated metal reinforced Buna-S tapered rubber poppet, stainless steel spring wire strainer.
Connections: 1" Female NPT (National Pipe Thread)
Working pressure: Up to 400 PSI
Maximum temperature: 225 degrees F.
Overall length: 4-3/8" (Fits inside 2" pipe)
Weight: 5/8 lbs. List: $53.05 Value Priced $38.67 |
|