Home > Sotera Series 400 Chemical Pump Only ------Discontinued
Series 400 Chemical Pump Only ----Discontinued
The Sotera Series 400 transfers the toughest ag-chem products, including encapsulated chemicals, slurry, fertilizers, & fluids with viscosities over 1000 CPS & particles 1/10” in diameter. 12 volt DC Chemical Diaphragm Pump only with battery cables and clips. Equipped with all the standard features, plus a 2" NPT bung adapter for use on dome/flat top Mini-Bulk containers.
Specifications
- Applications:
Metering, Paint, Solvent, Slurry, Slush & Sludge, Chemical, Fuel Oil
- Maximum Flow:
13 gpm (at nominal voltage using a standard hose and manual nozzle with low viscosity fluid (example: water).
- TDH Maximum:
34 feet ( 14.72 PSI)
- HP Standard:
1/4 HP
- Connections:
1” FNPT inlet & outlet
- Materials of Construction:
304SS, Poly-Pro. wetted parts; EPDM elastomers & Santoprene diaphragm
- Motor:
Explosion Proof 2850 RPM, 12 volts DC
- Self-priming:
Yes
- Suction Lift:
10’ **
- Maximum Operating Temperature:
130 °F
- Maximum Specific Gravity:
1.20
- Viscosity:
3,000 CPS or 20,000 SSU ( SAE 140 Gear Oil at 68 degrees Farenheit
- Maximum Volume of Suspended Solids:
3 %
- Maximum Particle Size:
0.10”
- Maximum Particle Hardness:
5.00
- Weight:
26 lbs
- NOTE:
** The lift in feet is equivalent to the vertical distance from the surface of the fluid in the tank to the inlet of the pump, PLUS the friction losses through the vertical and horizontal runs of pipe, all elbows and other fittings. The system should be designed to require a minimum amount of suction lift.
TIMES