LP gas (Propane) and natural gas are safe fuels as long as they are used correctly. Read your heater owner’s manual carefully, and remember that gas heaters require a trained technician for service and repair. Remember that gas is highly flammable, and that LP gas is heavier than air – it will collect in low spots. If you suspect a gas leak or smell gas, immediately clear the area and call the gas company from a telephone that is away from the area of the suspected leak. If you suspect a problem with your heater, don’t take chances by trying to fix it yourself – call your heater professional or the local gas company. Have your heater professional verify these points about your installation: Make sure that there is no leakage of exhaust gases into any building. This is especially important if the heater is installed indoors. Improper venting or damaged or rusted-out venting can cause serious injuries, illness, or death from carbon monoxide poisoning. 1) Your installation should comply with the requirements of the local and national codes that apply. 2) The heater exhaust vents should be located away from windows, air condi-tioners, or roof overhangs so that exhaust gases (which are poisonous) will not enter any buildings in the area. Check with your local building inspector for regulations concerning the location of heater exhaust relative to buildings. 3) If your heater is located indoors, review the venting information in the heater owner’s manual and, again, make sure that all vent pipes, air intakes, gas line installations, etc., meet all local and national code requirements. |