  
Myers Submersible Well Pump 35 GPM 5 HP 230V electricmotor, with Control Box # SJF5021L-SS5035, splice kit and dischage check valve. Sold as components (not assembled). Other accessories available and sold separately
IMPORTANT INFORMATION FOR INSTALLERS OF THIS EQUIPMENT!
The equipment is intended for installation by qualified, licensed contractors.
This is NOT a do-it yourself product. |
Includes: Myers # SS50-35 pump end, # SJF5021L 5 HP 4" 230 volt single phase motor, # CJ50-31 Control Box, # 22490A004K Cable Slice Kit and # CAP-22 2" Check Valve
Construction: Stainless steel discharge bowl, suction bowl, pump shell, suction screen, shaft, coupling and lead guard. Engineered thermoplastic staging. Buna-N shaft bearing.
Check Valve: Separate poppet type
Inlet: Screened inlet
Outlet: 2" FNPT.
Stages: 18
Electrical: 230 volts, 1 phase, 60 Hz, 5 HP, 27.5 amps. water cooled electric motor with thermal overload and lightning protection.
Lead wire length (Pigtail): 30"
Pump End Carton Dimensions: 5" high, 43" long, 5" wide.
Weight: 24 lbs
Motor Carton Dimensions: 5" high, 36" long, 5" wide.
Weight: 66 lbs
Control Box Carton Dimension: 12" high, 7" long, 10" wide.
Weight: 15 lbs
Check Valve Carton Dimensions: 6" high, 3" long, 3" wide
Weight: 6 lbs
The required control box is included in the price: Single phase three wire submersible motors require the use of an above ground control box. Operation of motors without control boxes or incorrect boxes will result in failure of motor.
| Pump Capacity Table - Myers SJF5021L-SS5035, |
| Discharge Pressure PSI |
Capacity At Depth To Water In Feet |
| 140' |
160' |
180' |
200' |
250' |
300' |
350' |
| Gallons Per Minute (GPM) |
| 20-40 Tank PSI |
|
49.0 |
47.0 |
45.0 |
39.0 |
32.0 |
23.0 |
| 30-50 Tank PSI |
49.0 |
47.0 |
45.0 |
43.0 |
36.0 |
28.0 |
18.0 |
| Pump Capacity Table at 0 PSI Tank Pressure
|
| Depth to Water in Feet |
250' |
300' |
350' |
400' |
| Gallons Per Minute (GPM) |
47.0 |
42.0 |
35.0 |
25.0 |
|