  
System components specifically pre-selected to meet a typical seven minute peak demand based on a 1 bathroom home when pumping from 10' suction lift with a 30-50 PSI working pressure, Pedrollo 1/3 HP 115 Volts. Kit includes pump, water tank, pressure switch, pressure gauge, interconnecting fittings, electrical cables and combination check / foot valve. Pumps are quiet but not silent.
Capacity Rating Chart
| Model |
HP |
Discharge Pressure
(PSI) |
Suction Lift In Feet |
| 5' |
15' |
25' |
Gallons Per Minute (GPM) |
| PK03A16SPS2SO1
|
1/3 |
20-40 |
8 |
7 |
6 |
| 30-50 |
6 |
5 |
4 |
| 40-60 |
4 |
3 |
2 |
Specifications
- Installation: Must be installed in enclosed places, or at least protected against inclement weather.
- Pump Cast iron pump casing with 1" threaded ports. Aluminum motor bracket with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. Brass radial peripheral vanes impeller. Stainless steel motor shaft. Ceramic, graphite and NBR mechanical seal.
- Connections: 1" female threaded ports
- Motor: The pump is close-coupled to a PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
- Electrical: 1/3 HP, 3450 RPM, 5.5 Amps, 115 Volt, 1 Phase,60 Hz, 1.15 Service Factor, class F insulation, with capacitor and thermal overload protector.
- Power Cord: General Purpose Power Supply Cord, 8 Ft, 18 Gauge, 3 Conductor, 10 Amp, 120 Volt, Type SJT, PVC Jacket, NEMA Plug 5-15P, Folded Brass Blades, Bare Ends, Black, UL Listed
- Tank: Pro-Source 2 Gallon Pre-charged Metal Tank # PS2-SO1. Equivalent in drawdown to a 6 gallon galvanized atmospheric tank.
- Maximum Suction Lift:
Not more than 20 feet recommended
- Maximum Allowable Suction Pressure: Not more than 30 PSI recommended
- Maximum System Discharge Pressure: Not to exceed than 100 PSI
- Duty Cycle: Continuous
- Availability: Ships next business day
Shipped With Tank Unmouted
|