No Longer Available. The Pedrollo PK-10C16S pump is used for pumping clean water without abrasives and liquids that are chemically non aggressive to the materials of construction. They are suitable for boiler feed , water misting, domestic use and as boosters for irrigating gardens.
Specifications
Installation: Must be installed in enclosed places, or at least protected against inclement weather.
Suction lift: 20 feet Not self priming. Must install check or foot valve in suction line.
Liquid temperature: Up to 140 degrees F
Ambient Temperature: Up to 104 degrees F
Construction Cast iron pump casing with 1" threaded ports. Aluminum motor bracket with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. Brass radial peripheral vanes impeller. Stainless steel motor shaft. Ceramic, graphite and NBR mechanical seal.
Connections: 1" female threaded ports
Motor: The pump is close-coupled to a PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
Electrical: 1 HP, 3450 RPM, 9.5 Amps, 230 Volt, 1 Phase, 60 Hz, 1.15 Service Factor, class F insulation, with capacitor and thermal overload protector.
Power Cord: None
Duty Cycle: Continuous
Dimensions: 14.0" L X 6" W X 9" H
Weight: 34 lbs
Pump Capacity Table |
Model |
HP |
Total Dynamic Head In Feet And (PSI)
|
Shut-off (PSI) |
69.3 (30) |
92.4 (40) |
104.0' (45) |
115.5 (50) |
138.6' (60) |
161.7' (70) |
184.8' (80) |
207.9' (90) |
231.0' (100) |
254.1' (110) |
Gallons Per Minute (GPM) |
PK-10C16S |
1 |
16 |
15 |
12 |
10 |
9 |
8 |
7 |
6 |
5 |
2 |
279' (120 PSI) |