Pedrollo Peripheral Turbine Pump 3/4 HP 230 V 1 Phase # PKH-07C16S. The Pedrollo PKH-07C16S pump is used for pumping clean water without abrasives and liquids that are chemically non aggressive to the materials of construction. They are suitable for boiler feed , water misting, domestic use and as boosters for irrigating gardens.
Installation: Must be installed in enclosed places, or at least protected against inclement weather.
Suction lift: 20 feet Not self priming. Must install check or foot valve in suction line.
Liquid temperature: Up to 140 F
Ambient Temperature: Up to 104 F
Construction Cast iron pump casing with 3/4" threaded ports. Aluminum motor bracket with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. Brass radial peripheral vanes impeller. Stainless steel motor shaft. Ceramic, graphite and NBR mechanical seal.
Connections: 3/4" female threaded ports
Motor: The pump is close-coupled to a PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
Electrical: 3/4 HP, 3450 RPM, 5.6 Amps, 230 Volt, 1 Phase, 60 Hz, 1.15 Service Factor, class F insulation, with capacitor and thermal overload protector.
Power Cord: None
Duty Cycle: Continuous
Dimensions: 11.2" L X 5.5" W X 7" H
Weight: 22.7 lbs
Pedrollo PKH Series Turbine Pumps With Peripheral Impellers |
Model USA |
Volts |
HP |
Ph. |
Max. Amps |
Wt. Lbs |
Connections |
PKH07C16S |
230 |
3/4 |
1 |
5.6 |
22.7 |
3/4" X 3/4" |
Pump Capacity Table |
Model |
HP |
Total Dynamic Head In Feet And (PSI)
|
Shut-off (PSI) |
25' (11) |
50' (22) |
75' (33) |
100' (43) |
125' (54) |
150' (65) |
175' (77) |
200' (87) |
225' (97) |
Gallons Per Minute (GPM) |
PKH-07 |
3/4 |
10.5 |
9.5 |
8.5 |
7.5 |
6.9 |
6.0 |
4.9 |
4.0 |
2.2 |
296' (128 PSI) |