Pedrollo Pump, 304 stainless steel with polymer diffusers and impellers, 13 GPM, 5 HP, 230 Volts, 1 phase, 60 HZ, 4" deep well submersible 4SR13G-50C163C, 42 stage, 3-wire, with Franklin Electric motor & control box for domestic water and boosting applications.
IMPORTANT INFORMATION FOR INSTALLERS OF THIS EQUIPMENT!
The equipment is intended for installation by qualified, licensed contractors.
This is NOT a do-it yourself product. |
Specifications
Minimum Well diameter: 4"
Inlet: Screened inlet
Outlet: 1-1/4" FNPT.
Stages: 30
Electrical: 230 V, 1 PH, 60 Hz, 5 HP, (23.0 Y, 15.9 B,11.0 R Amps.), 4920 Watts, 1.15 S.F.
Motor: Franklin Electric water cooled submersible motor # 2243038602
Control Box: Franklin Electric single phase 230 volt, Nema 1 enclosure # 2821138110
Lead wire length (Pigtail): 48"
Carton Dimensions: 5" high, 73" long, 5" wide.
Weight: 86 lbs
Required control box (included in price): Single phase three wire submersible motors require the use of an above ground control box. Operation of motors without control boxes or incorrect boxes will result in failure of motor.
| Pump Capacity Table - Pedrollo 4SR13G-50C163C |
| Discharge Pressure PSI |
Capacity At Depth To Water In Feet |
| 340' |
380' |
420' |
460' |
500' |
580' |
660' |
740' |
820' |
900' |
980' |
1060' |
1140' |
1260' |
1300' |
| Gallons Per Minute (GPM) |
| 0 PSI |
|
|
|
18.0 |
17.8 |
16.5 |
15.7 |
14.9 |
13.8 |
12.5 |
11.4 |
9.5 |
7.5 |
4.6 |
3.0 |
| 20-40 PSI |
|
|
17.8 |
17.5 |
17.0 |
16.3 |
15.5 |
14.5 |
13.5 |
12.2 |
10.6 |
9.0 |
6.6 |
3.6 |
|
| 30-50 PSI |
|
18.0 |
17.8 |
18.4 |
16.9 |
16.2 |
15.4 |
14.2 |
13.0 |
11.8 |
10.2 |
8.5 |
6.2 |
|
|
| 40-60 PSI |
18.0 |
17.8 |
17.5 |
17.0 |
16.5 |
15.9 |
15.0 |
13.8 |
12.6 |
11.5 |
9.8 |
7.9 |
5.0 |
|
|
PDP-PMP-4SR-Well-Sub-Bulletin.pdf
TIMES