Plastic Rotary Ryton Drum Pump For Chemicals # 4642-99 (D)

Plastic Rotary Ryton  Drum Pump For Chemicals # 4942-99 (C)
Item# AMT-PMP-4942-99
List: $157.78
Value Priced $115.02
Availability: ships the next business day

AMT Plastic Rotary Ryton Drum Pump For Chemicals # 4942-99 is designed for the transfer, pumping and dispensing of aggressive chemicals including many esters, alcohols and hydrocarbons which are compatible with pump component materials. Ryton body with Ryton vanes and rods and Teflon seals, has exceptional chemical resistance. Hand crank rotary action.

Suitability for the application should be determined by actual use and is the full responsibility of the customer. No warranty, expressed or implied, is extended by the manufacturer where failure is caused by chemical attack on pump materials. Temperature, aeration, concentration, and other factors may change the effect of the specific fluid on the pump materials. Data shown is based on the results at ambient temperatures, unless otherwise noted. Replaces the RP-90R Pump and the GPM-PMP-534100 chemical pumps/

Specifications

Applications:Designed for transfer, pumping and dispensing of aggressive chemicals including many esters, alcohols and hydrocarbons which are compatible with pump component materials. Components:Pump head, handle and knob assembly, strainer for suction tube. 3-part suction tube, 2-piece discharge spout and a roll of Teflon tape Construction: Ryton discharge spout, front & rear casings, cylinder, handle, crank arm, spring shaft, bung adapter, suction tube & strainer, Ryton vanes, & rotor, Teflon lip seal, Teflon coated Stainless Steel spring. Steel handle shaft, Corrosion resistant bolts, nuts & washers. Fits: 30 gallons to 55 gallon barrels. Inlet: Tapped female 1-1/4-16 Unified for the included 1" male suction tube. Outlet: Tapped female 1"-16 Unified for the included male spout. Suction tube: Three piece Ryton 1" x 47" with unified threads Barrel adapter:2" bung adapter included. Capacity: 1 Gallon per 11.67 revolutions or 6 Gallons per 70 revolutions Viscosity: For liquids up to 2000 SSU (about the "thickness" of SAE 30 motor oil). Maximum Liquid Temperature: 180 degrees Fahrenheit Carton dimensions: 15" high X 7" wide x 6" long. Weight:8 lbs.


AMT-PMP-Rotary-Poly-4949-99-Manual.pdf

Questions & Answers

Should the pump be washed out before usage?
Yes......since processing lubricants could contaminate the liquid.
Does the pump conform with OSHA rules for dispensing liquids?
It is the responsability of the user to operate the pump in conformance with OSHA rules for dispensing liquids.
Should the pump and containers be grounded when using with flammable liquids?
Yes.....to avoid static electricity. Both pumping-from and pumping-to containers should be bonded and grounded to disipate possible accumulations of static electricity and minimize sparks caused by static electricitym ( Refer fo pump operating Manual and to NFPA 77 for specifics and further details)
Are there any safety rules to follow when pumping gasoline?
Yes....Gasoline is a highly flammable fuel. The improper use, handling or storage of gasoline can be dangerous. Prevent accidents by following the safety rules and WARNINGS in the pump operating manual included with the unit.

Ask a question about Plastic Rotary Ryton Drum Pump For Chemicals # 4942-99 (C). Click here
Customer Reviews



About Us Contact Us Customer Reviews Facebook Twitter Disclaimers Privacy Policy Returns Shipping Policy Terms of Sale Terms of Use Warranty FAQ Site Map Technical Info Terminology Troubleshooting
  • Internet prices apply only to Internet purchases.
  • Minimum order amount is $20.00.
  • All merchandise listed is in stock.
  • Orders are shipped the next business day.
  • We only sell within the 48 adjacent United States.
  • Shipping tracking numbers are e-mailed automatically.
  • Office hours are: Mon - Fri, 8am - 5pm EST excl. holidays.
Copyright © 2012 All Rights Reserved.