CHEMTRAVELLER 12 Volt DC Sotera transfer pump with Santoprene® diaphragms, 1" X 14' EPDM discharge hose, 1" X 9' EPDM suction hose, ball-valve nozzle, 825 digital meter, high profile tubular frame.
Sotera CHEMTRAVELLER™ portable 12 Volt DC system for transferring agricultural products such as herbicides, insecticides, fungicides, matricides, water, acid, sludge/slurry, hydraulic oil, lube oil, waste oil, diesel fuel, detergents & chemicals
Specifications
Duty Cycle: 30 minutes, not for continuous operation.
1/4 HP, 2600 RPM, 12 volt DC, 20 amp maximum draw (5 amps in full bypass) Explosion proof UL listed
Particle tolerance:
Up to 0.1" diameter
Battery cable/battery clips:
20'
Discharge pressure:
15 PSI Maximum
Flow rate:
13 GPM (1.5 cps fluid)
11 GPM (350 cps fluid)
Discharge hose:
EPDM 1" X 14' ,
Suction hose:
EPDM 1" X 9' ,
Nozzle:
ball-valve
Meter:
825 digital meter (9999 current total; 10,000,000 accumulated total)
Maximum Outlet Pressure:
15 PSI (1.09 BAR)
Maximum flow rate¹:
13.0 GPM (49.3 LPM)
Maximum Viscosity of fluid pumped:
3000 CPS (SAE140 Gear Oil at 68°F)
Maximum ambient operating temperature:
130 °F (54 °C)*
Minimum ambient operating temperature:
-10 °F (-23 °C)
Minimum dry vacuum:
10 Inches of Hg.
Minimum suction lift:
10 Feet
Dimensions:
21.5" High, 15.5" Wide, 18" Deep
Weight:
50lbs
NOTES¹
Nominal flow rate at nominal voltage using a standard hose and manual nozzle with low viscosity fluid. ** The lift in feet is equivalent to the vertical distance from the surface of the fluid in the tank to the inlet of the pump, PLUS the friction losses through the vertical and horizontal runs of pipe, all elbows and other fittings. The system should be designed to require a minimum amount of suction lift.
DANGER:
NOT FOR USE WITH GASOLINE OR ALCOHOL OR ANY FLUID THAT HAS A FLASH POINT BELOW 100 DEGREES FAHRENHEIT
