Pedrollo 3/4 HP 230/1/60 Cast Iron Centrifugal Pump CP07-C16S. Cast iron pump body, brass impeller, stainless steel motor shaft, ceramic- graphite mechanical seal, 1" x 1" Female NPT connections, 3/4 HP, 3450 RPM, 230 volts, 1 phase, 60 Hz, 5.2 amps
Construction:
Pump Body: Cast iron, with threaded ports
Back-Plate: Stainless steel AISI or cast iron on higher powered models
Motor Shaft: Stainless Steel EN 10088-3-1.4104
Mechanical Seal: Ceramic-graphite-NBR
Connections: 1" X 1" female NPT suction and discharge
Motor:
3/4 HP, 3450 RPM, TEFC, single phase, 230 volts, 60 Hz, ball bearings front and back, built-in overload protection. Clockwise rotation, when facing back of motor.
Maximum working pressure: 140 PSI
Maximum inlet pressure: 30
Maximum working temperature: 180 degrees Fahrenheit
Carton dimension: 10" high, 10" wide, 14" long.
Weight: 19 lbs
| Pump Capacity - Pedrollo CP07-C16S At 0 Suction Lift |
| Model |
HP |
Capacity At Total Dynamic Head In Feet |
Shut
Off |
| 20' |
30' |
40' |
50' |
60' |
70' |
80' |
90' |
100' |
110' |
120' |
130' |
140' |
| Gallons Per Minute (GPM) |
| CP07-C16S |
3/4 |
- |
- |
- |
24.0 |
21.0 |
18.0 |
15.0 |
13.0 |
9.0 |
- |
- |
- |
- |
115' |
PDP-PMP-CP-.50to2hp-Centrifugal-Bulletin.pdf
TIMES