Pedrollo automatic plastic sump pump 52 GPM 1/3 HP, 4.5 amps, 115 volts, 1 phase, 60 Hz with 30 and overload protection, model # TOP-03A16A. Pumps up to 4/10" solids down to 1/2" from the bottom. Dimensions: 11.0" high, 8.0" wide. Wt: 11 lbs.
Specifications
Applications: They are recommended for emergency draining of small flooded areas (rooms, cellars, garages) for the disposal of waste water in the home (dishwasher, washing machine) and emptying drainage traps.
Construction:
Manufactured with non-corrosive and rust proof materials. Polymer body, suction grid and impeller; stainless steel 304 motor support and shaft.
Seal: Mechanical seal ceramic-graphite, with oil barrier chamber (FDA approved oil) plus an inner lip seal to protect the seal in the event of dry running.
Impeller type: Open
Bearings: Upper and lower ball bearings
Inlet: Easy to clean techno polymer inlet screen.
Outlet: Three installation choices provided. 1-1/4" male pipe thread connection molded on pump body, 1-1/4"
female pipe connector, 1-1/4" insert hose connector
Submersion Depth: Up to 16 feet
Emptying Level: Up to 1/2" from the bottom
Solids: 4/10"
Liquid Temperature: Up to 104 degrees Fahrenheit
Electrical: Continuous duty, oil-less, class F insulation motor with capacitor and overload protection, 115 volts, 1 phase, 60 Hz, 1/3 HP, 4.5 amps, with 30 ft. cord.
Dimensions: 11.0" high, 8.0" wide.
Weight: 11 lbs.
| Pump Capacity Table TOP-03A16S In Gallons Per Minute |
| Model |
HP |
Head In Feet |
Shut-off |
| 5' |
10' |
15' |
20' |
25' |
| Gallons Per Minutes (GPM) |
| TOP-03A16S |
1/3 |
52.0 |
40.0 |
30.0 |
22.0' |
7.0 |
29.0' |
PDP-PMP-TOP-Sump-Sub-Bulletin.pdf
TIMES