Liberty OilTector Sump Pump 63 GPM 1/2 HP 115V # ELV-280

Liberty OilTector Sump Pump 63 GPM 1/2 HP 115V # ELV-280. The OilTector is designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector system will activate the pump to remove water from elevator pits and will provide pumping of only water - even if an oil condition is detected. The OilTector cycles the pump only in the water range. Oil and other harmful substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.

Specifications

Operation On water rise, the pump will activate when the water level reaches the �start� probe. Pump will remain on until the water level is below the �off� probe. When the �off� probe no longer senses water it turns the pump off, air or oil are ignored and an oil layer (if present) will not be pumped out of the sump. If the liquid level reaches the �alarm� probe and mechanical float, the system will differentiate between water and oil and activate the appropriate alarm Solids handling: 3/4" diameter Outlet: 1-1/2� FNPT Impeller type : Vortex Maximum Fluid Temperature : 140 degrees Fahrenheit Minimum sump diameter: 14" Electrical: 115 volts, 1 phase, 60 Hz, 1/2 HP, 8.5 amps, 3450 rpm, oil filled, thermally protected, motor with 10' power cord with grounded plug Pump Dimensions: 10.5" high, 9.6 major width Enclosure Dimensions : 8.75" High x 6.5" Wide x5" Deep Weight: 34 lbs