 |  | 
 
Liberty Pump simplex effluent & sewage ejector system 100 GPM. 1/2 HP 115 Volt 2" Solid handling capacity submersible sump and effluent pump in a 41 gallon basin. Fully automatic operation. Removes gray wastewater and sewage when drainage is needed below gravity lines. Kit includes tank, pump with switch and discharge PVC nipple. Assembly is required.
TANK, PUMP AND PVC NIPPLE AND LEVEL SWITCH KIT ARE SHIPPED
SEPARATELY TO PREVENT DAMAGES IN TRANSIT
Usually ships next business day.
System components- Liberty Submersible Sump & Sewage Pump 100 GPM 1/2 HP # LE51M-2
- Liberty Pump Basin 41 Gallons # K001108-SYS
- PVC Nipple Schedule 80 2" X 23-3/4" # 40650A0-SYS
- Liberty Pro370 QuickTree Level Switch Kit # QT370-115-25SYS
- Components shipped in separate cartons to prevent damage in transit.
- Assembly is required.
Specifications
- Pump Construction: Heavy cast iron casing and motor cover; 2-vane, corrosion resistant plastic "HYTREL" impeller; stainless steel fasteners and rotor shaft. Oil-filled, thermally protected motor. Permanently lubricated bearings.
- Solid handling: 2"
- Pump Outlet: 2 FNPT
- Pump Discharge Nipple : Schedule 80 PVC 2" X 23-3/4" # 40650A0-SYS
- Electrical: 115 volts, 1 phase, 60 Hz, 1/2 HP, 13 amps, 25' power cord with grounded plug. Quick disconnect power cord allows replacement of cord in seconds without breaking seals in motor.
- Level Switch Kit: Liberty Pro370 QuickTree # QT370-115-25SYS (Hang the QuickTree from it's holder underneath the access cover. Includes a stainless steel rod, pre-mounted pump float clamps plus an additional clamp for an alarm.
- Basin capacity: 41 Gallons
- Basin Inlet: Accepts 4" flexible coupling
- Basin Discharge: 2" MNPT nipple schedule 80 PVC.
- Basin Vent: 2" FNPT.
- Basin Anti-float collar: Integrally molded
- Basin Handles: Integrally molded for ease of transportation
- Basin Construction: Polyehylene basin with radial ribs for added strength, corrosion proof structural foam cover with stainless steel hardware. QuickTree system allows wasy access and removal of switches without disturbing pump or plumbing.
- Basin Dimensions: 30 " high, 21.5 major width. (10" to center of inlet hub)
- Certifications: SSMA & CSA
- Availability: Usually ships next business day.
| Capacity Table # LE51M In Gallons Per Minute |
| Model |
HP |
Total Dynamic Head (TDH) |
Shut-off |
| 5 |
10 |
15 |
20 |
| Gallons Per Minute (GPM) |
| LE51M |
1/2 |
135 |
108 |
78 |
40 |
25 TDH |
Ships Via Truck Line Only To A Commercial Address. See Requirements
| If the shipping amount reads $0.00 it simply means that your order has exceeded the standard 150 lb. shipping limit and shipping charges cannot be computed automatically. Please divide the items and place multiple orders to see the shipping charges. |
|
|  Liberty Access Riser & Cover for 370 Basin System # ARC18 (A)Liberty's new 370-Series Access Riser allows burial of a Liberty 370 System up to a maximum depth of 18" below grade. Access Riser simply slides over the sealed 370 system. The cover is retained by 4 stainless steel bolts and features a twist-lock design with provision for padlock to deter unwanted entry.
| |  PVC Ball Valve - Solvent Ends 2" # HMIP200SE (A)
| |  Conery Indoor/Outdoor Liquid Level Alarm # JB15H (B)Alarm horn sounds and red beacon illuminates when a high liquid level condition occurs. Includes silence button, test switch, 15' level switch and 6' power cord. Does not include auxiliary contacts.
|
|