 |  | 
  
MP Pumps Flomax 15, 3" NPT Flomax self priming centrifugal pumps. Up to 300 GPM, up to 125' head (54 PSI), 3450 RPM. Available in cast iron, all bronze and 316 stainless steel construction. Close coupled, long coupled and in PumPaks less motors.
Specifications
- Rated Capacity 300 GPM
- Maximum
Discharge Pressure: 125 feet (54 PSI)
- Suction & Discharge Connections: 3" X 3" FNPT
- Construction:
Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft; viton mechanical seal.
- Motors 5 HP or 7-1/2 HP
TEFC, 3450 rpm, single phase or three phase, 60 Hz
| Pump Capacity - MP Pumps Flomax 15 Self Priming Pumps At 0 Suction Lift, 3600 RPM |
| HP |
Imp. |
Capacity At Total Dynamic Head In Feet |
Shut Off |
| 40' |
50' |
60' |
70' |
80' |
90' |
100' |
110' |
120' |
| Gallons Per Minute (GPM) |
| 5 |
5.5" |
250 |
220 |
190 |
150 |
110 |
70 |
  |
  |
  |
102' |
| 7-1/2 |
5.75" |
260 |
230 |
205 |
180 |
140 |
110 |
65 |
  |
  |
113' |
| 7-1/2 |
6.0" |
310 |
280 |
255 |
230 |
200 |
170 |
135 |
100 |
60 |
134' |
|
 |  |  | MP Pumps Flomax 15 Cast Iron Construction 3"
 MP Pumps Flomax 15, 3" NPT Flomax self priming centrifugal pumps. Up to 300 GPM, up to 125' head (54 PSI), 3450 RPM. Available in cast iron, all bronze and 316 stainless steel construction. Close coupled, long coupled and in PumPaks less motors

|  |  |  | MP Pumps Flomax 15 Pumpak (Liquid End Less Motor)
 Flomax 15 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron, all bronze and 315 SS construction and will fit 56C NEMA motors less feet or 184C/145TC NEMA motors with feet

|
|