Oberdorfer, macerator, single phase, close-coupled, bronze, self priming, rubber impeller pump with vacuum switch. Designed specifically for pumping sewage from boats to holding tanks or sewer connections. The function of the pump is to suction the solids and liquids from the holding tanks, grind the effluent with the rotating cutter head down to a small particle size and discharge of the waste to a convenient receptacle either above or below the pump elevation. Macerator pumps are not designed to be run dry of liquids. The impellers will wear and the pumps capacity to discharge the liquids will be lessened. The Oberdorfer macerator pump will macerate and pump all waste and tissue normally found in marine waste systems. IT WILL NOT HANDLE HARD SOLID OBJECTS, SANITARY NAPKINS, OR RAGS.
Construction: Casing, cutter and bracket are bronze. Buna N rubber impeller.
Impeller: Buna N (Nitrile). Buna N impellers can handle oil contaminated water as opposed to neoprene impellers who can't
Motor: 1 HP 1725 RPM 115/230/1/60 connected for 115 volts
Suction Connection: 1-1/2 Male NPT pipe thread or 2" ID hose
Discharge Connection: 1" female NPT pipe thread or 1-1/2 ID hose.
Operation: A bronze cutter grinds down waste to small particle size which makes it possible to eject them through the discharge nozzle of the pump.
Mounting: Dockside or on-board
Liquid temperature range: 40 to 140 degrees Fahrenheit
Suction Lift: 15 feet are possible when pump is fully primed.
Approximate dimensions: 18" long, 7" wide, 10" high
Approximate Weight: 45 lbs
|Pump Capacity Table
|| Discharge Pressure PSI
| Gallons Per Minute (GPM)|