Pedrollo 1/2 HP 115/1/60 Cast Iron Centrifugal Pump CPX05-A16S. Cast iron pump body, Technopolymer impeller, stainless steel motor shaft, ceramic- graphite mechanical seal, 1" x 1" Female NPT connections, 1/2 HP, 3450 RPM, 115 volts, 1 phase, 60 Hz, 8 amps
Construction: Pump Body: Cast iron, with threaded ports, Body Back-Plate Stainless steel AISI or cast iron on higher powered models; Mechanical Seal: Ceramic-graphite-NBR
Connections: 1" X 1" female NPT suction and discharge
Motor:
1/2 HP, 3450 RPM, TEFC, single phase, 115 volts, 60 Hz, ball bearings front and back, built-in overload protection. Clockwise rotation, when facing back of motor.
Maximum working pressure: 140 PSI
Maximum inlet pressure: 30
Maximum working temperature: 180 degrees Fahrenheit
Carton dimension: 10" high, 10" wide, 14" long.
Weight: 19 lbs
| Pump Capacity - At 0 Suction Lift |
| Model |
HP |
Capacity At Total Dynamic Head In Feet |
Shut
Off |
| 30' |
40' |
50' |
60' |
70' |
80' |
90' |
100 |
110 |
120' |
130' |
140' |
| Gallons Per Minute (GPM) |
| CPX05-A16S |
1/2 |
- |
- |
17.8 |
15.5 |
12.5 |
9.3 |
5.0 |
- |
- |
- |
- |
- |
99' |
PDP-PMP-CP-.50to2hp-Centrifugal-Bulletin.pdf
TIMES