Liberty OilTector Sump Pump 45 GPM 1/3 HP 115V # ELV-250

NO LONGER AVAILABLE. Liberty OilTector Sump Pump 45 GPM 1/3 HP 115V # ELV-250. The OilTector is designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected.

Specifications

Operation: On water rise, the pump will activate when the water level reaches the "start" probe. Pump will remain on until the water level is below the "off" probe. When the "off" probe no longer senses water it turns the pump off, air or oil are ignored and an oil layer (if present) will not be pumped out of the sump. If the liquid level reaches the "alarm" probe and mechanical float, the system will differentiate between water and oil and activate the appropriate alarm Solids handling: 1/2" diameter Outlet: 1-1/2" FNPT Impeller type: Vortex Maximum Fluid Temperature: 140 degrees Fahrenheit Minimum sump diameter: 12" Electrical: 115 volts, 1 phase, 60 Hz, 1/3 HP, 5.2 amps, oil filled, thermally protected, 10' motor with power cord with grounded plug Pump Dimensions: 10.5" high, 9.6 major width Enclosure Dimensions: 8.75" High x 6.5" Wide x 5" Deep Weight: 34 lbs