Pedrollo Automatic 2" Sewage Pump 80 GPM 1/2 HP # VX05-A16A, 8 amps, 115 volts, 1 phase, 60 Hz with 30 ft. cord, continuous duty, oil-less, motor with capacitor and overload protection. Vortex impeller pumps up to 2" solids. Dimensions: 16.1" high, 9.4" wide. Weight: 30 lbs.
Specifications
Applications: Drying flooded areas, such as cellars, underground parking garages, car wash areas, domestic drains and for septic tank and sewage disposal. .
Construction: Cast iron body, 304 stainless steel motor casin, base, impeller and shaft.
Double Seal: Silicon carbide mechanical seal, with oil barrier chamber (FDA approved oil) plus an inner lip seal to protect the seal in the event of dry running.
Impeller type: Vortex
Bearings: Upper and lower ball bearings
Outlet: 2"
female pipe connector
Submersion Depth: Up to 15 feet
Minimum Immersion: 11" from the base
Minimum Basin Diameter: 19.7"
Solids: 2"
Liquid Temperature: Up to 104 degrees Fahrenheit
Motor: Continuous duty, oil-less, class F insulation with capacitor and overload.
Electrical: 115 volts, 1 phase, 60 Hz, 1/2 HP, 8.0 amps, with 30 ft. cord.
Dimensions: 16.1" high, 9.4" wide.
Weight: 30 lbs.
Note:
With a vortex impeller, flow through pump is produced not by the actual impeller, but rather by a rotating vortex created by the impeller. Because the pumping action is created by the vortex, particles in the liquid do not come in contact with the impeller itself, thus minimizing wear and clogging.
| Capacity Table # VXH05-A16S In Gallons Per Minute |
| Model |
HP |
PH |
Volts |
Amps |
Cord |
Size |
Total Dynamic Head (TDH) |
Shut-off
(feet) |
| 5' |
10' |
15' |
20' |
| Gallons Per Minute (GPM) |
| VX05-A16A |
1/2 |
1 |
115 |
8 |
30' |
2" |
66 |
55 |
45 |
26 |
28' |
PDP-PMP-VX-Sewage-Sub-Bulletin.pdf
TIMES