This Conery mechanically-activated pump switch is designed to operate in non-potable water and sewage applications with limited space. It work well in small sump chambers, effluent applications, and laundry trays, as well as in large tanks. It is available for pump down applications only.
Application: Normally open contacts for pump down operation(contacts are open in the off position and closed in the on position)
Recommended Pump HP: 1/2 HP or less
Maximum pump run current: 13 amps
Maximum Pump Starting Current: 60 amps
Electrical: 120 VAC 60Hz Single Phase
Range: Adjustable pumping range of 8.9375 to 6.5 inches _
Cable: 20'flexible 16-2 gauge, 2 (UL, CSA) SJO0W-300, water-resistant with 115 volt "piggy back" plug.
Float: 2.3 inch high x 2.7 width corrosion resistant, PVC housing
UL Recognized for use in non-potable water and sewage. CSA Certified.