Burks close coupled three phase boiler feed regenerative turbine pump. Impeller can be readjusted externally without disturbing piping, dismantling pump or replacing parts.
Specifications
Construction: Cast Iron frame and casing, bronze raceway, bronze impeller with monel blades, 316 stainless steel shaft, Single mechanical seal with carbon faces, Buna elastomers and 300 series stainless steel parts.
Connections: 1-1/4" X 1" female NPT suction and discharge
Motor: 1-1/2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60/50 Hz, with ball bearings front and back and built-in overload protection. Counterclockwise rotation, rated with jet pump service factor.
Maximum working pressure: 250 PSI
Maximum inlet pressure: 100 PSI
Maximum working temperature: 180 degrees Fahrenheit
Carton dimension: 14" high, 15" wide, 24" long
Weight: 60 lbs
Pump Capacity Table 315CS6M In Gallons Per Minute
Model
HP
Head In PSI
8.6
17.2
26
43.3
54.1
64.9
75.8
86.6
97.4
108.3
Gallons Per Minute (GPM)
315CS6M
1.5
16
15.2
14.5
13.5
12.8
12.4
12
11.5
11
10.7
Questions & Answers
Ask a question about Burks Pumps Boiler Feed Turbine Pump 16 GPM 1.5 HP # 315CS6M (D)