Call (305)-754-0677
Flomax 15 Cast Iron 3" NPT PumPak Less Motor # 21384
Availability:Usually ships in 2-3 business days
Shipping ChargesDescription
Flomax 15 Pumpaks are liquid-ends less power source. Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Cast iron construction and will fit 56C NEMA motors less feet or 184C/145TC NEMA motors with feet. PumPaks are provided less motors and with 5" maximum impeller diameters.
Specifications
Rated Capacity 300 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 3" X 3" NPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal. Motors: Pump water end only less motors Motors Required: 5 HP or 7-1/2 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required: 56C NEMA motors less fit or 184C/145TC NEMA motors with feet Weight: 68 lbs.
| Pump Capacity - MP Pumps Flomax 15 Self Priming Pumps At 0 Suction Lift, 3600 RPM | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Requier Motor HP |
Required Impeller Trim |
Capacity At Total Dynamic Head In Feet | Shut Off |
||||||||||
| 40' | 50' | 60' | 70' | 80' | 90' | 100' | 110' | 120' | |||||
| Gallons Per Minute (GPM) | |||||||||||||
| 5 | 5.5" | 250 | 220 | 190 | 150 | 110 | 70 | - | - | - | 102' | ||
| 7-1/2 | 5.75" | 260 | 230 | 205 | 180 | 140 | 110 | 65 | - | - | 113' | ||
| 7-1/2 | 6.0" | 310 | 280 | 255 | 230 | 200 | 170 | 135 | 100 | 60 | 134' | ||
Resources
Questions & Answers
Ask a question about Flomax 15 # 21384 Cast Iron 3" NPT PumPak Less Motor (C)
