Call (305)-754-0677
Flomax 5 # 26268 All Bronze PumPak Less Motor
Item#:
MPP-PMP-26268
Availability:Usually ships in 2-3 business days
Sale: $2,863.90
Shipping ChargesDescription
Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit or 184C/145TC NEMA motors with feet.
Specifications
Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal. Motors Pump water end only less motors Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required 184C/145TC NEMA motors with feet Weight: 40 lbs.
| Pump Capacity - MP Pumps Flomax 5 Self Priming Pumps At 0 Suction Lift, 3600 RPM |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Required Motor HP |
Required Impeller Trim |
Capacity At Total Dynamic Head In Feet | Shut Off |
|||||||||
| 20' | 30' | 40' | 50' | 60' | 70' | 80' | 90' | |||||
| Gallons Per Minute (GPM) | ||||||||||||
| 3 | 5.0" | 150 | 140 | 120 | 100 | 80 | 60 | 40 | 15 | 96' | ||
Resources
Questions & Answers
Ask a question about Flomax 5 # 26268 All Bronze PumPak Less Motor (D)
