Call (305)-754-0677
Flomax 10 # 21366 Cast Iron PumPak Less Motor
Availability:
Shipping ChargesDescription
Flomax 10 Pumpaks are liquid-ends less power source. Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Cast iron construction and will fit 184C/145TC NEMA motors with feet. PumPaks are provided less motors and with 5" maximum impeller diameters. Drop Ships from factory 7-10 business days
Specifications
Rated Capacity 140 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal. Motors: Pump water end only less motors Motors Required: 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required: 184C/145TC NEMA motors with feet Weight: 67 lbs
| Pump Capacity - MP Pumps Flomax 10 Self Priming Pumps At 0 Suction Lift, 3600 RPM | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Required Motor HP |
Required Impeller Trim |
Capacity At Total Dynamic Head In Feet | Shut Off |
||||||||||
| 40' | 50' | 60' | 70' | 80' | 90' | 100' | 110' | 120' | |||||
| Gallons Per Minute (GPM) | |||||||||||||
| 5 | 5.5" | 200 | 180 | 160 | 130 | 90 | 40 | - | - | - | 97' | ||
| 7-1/2 | 5.75" | - | 210 | 195 | 170 | 135 | 95 | 55 | - | - | 111' | ||
| 7-1/2 | 6.0" | - | 225 | 215 | 195 | 165 | 130 | 100 | 70 | 30 | 132' | ||
Resources
Questions & Answers
Ask a question about Flomax 10 # 21366 Cast Iron PumPak Less Motor (D)
