Pedrollo Pumps 4 CP Series Cast Iron
Multi-Stage Centrifugal Pumps

Multiple stage cast iron centrifugal pumps. Particularly quiet running with high efficiency and low power consumption. Suitable for domestic applications. Flow rates up to 34 GPM., heads up to 164 ft (70.5 PSI) and suction lifts up to 20 feet.

Performance Range: Flow rate up to 34 gpm; Head up to 164 ft Limits of Use: 20 ft suction lift; 104 F liquid temperature; 104 F ambient temperature Applications They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. DUE TO THEIR RELIABILITY, QUIET RUNNING AND LOW MAINTENANCE, THEY ARE SUITABLE FOR DOMESTIC APPLICATIONS INCLUDING WATER SUPPLIES (AS A PRESSURE SET), GARDEN IRRIGATION, ETC. The pumps must be installed in enclosed places, or at least protected against inclement weather. Construction:Pump Body: cast iron, with threaded ports; Body Back-plate: stainless steel AISI 304. Impellers: of the type with centrifugal radial flow, made of technopolymer (approved for drinking water); Motor Shaft:stainless steel Mechanical Seal: ceramic - graphite - NBR. Motor: the pumps are close-coupled to a carefully matched PEDROLLO class F insulation electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. Electrical: 3-4CP Single-phase are 115 V or 230 V - 60 Hz with capacitor and thermal overload protector; three-phase are 230/460 V - 60 Hz.