Pedrollo PQA Series Peripheral
Lateral Suction Turbine Pumps
The Pedrollo plastic PQA (same as Pedrollo PQA60 european version) peripheral lateral suction turbine pumps have flow rates of up to 13 GPM and heads to 295 feet Handle suction lift up to 26' and liquids up to 194°F. They have a plastic body, brass impeller and body plate, aluminum motor bracket and stainless steel shaft.
Performance Range: Flow rate up to 13 gpm Head up to 295 ft
Limits of Use: 26 ft suction lift; 194°F liquid temperature; 104 °F ambient temperature
They are recommended for pumping clean water and liquids without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. NON-FERROUS CONSTRUCTION WITH WETTED PARTS IN HIGH PERFORMANCE TECHNOPOLYMER AND BRASS TO ELIMINATE THE POSSIBILITY OF CORROSION.CONSEQUENTLY THEY ARE RECOMMENDED FOR INDUSTRIAL APPLICATIONS INCLUDING COOLING, CONDITIONING AND BOILER FEED. The pumps must be installed in enclosed places, or at least protected against inclement weather.
Construction:Pump Body: high-performance technopolymer with metalthreaded port insert for secure pipe connection without damage to the pump body. Body Back-plate: Brass Impellers: Brass, with radial peripheral vanes.
Motor Shaft: stainless steel
Mechanical Seal: ceramic - graphite - NBR
Motor: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty Electrical: Single-phase are 115 V or 230 V, 60 Hz with capacitor and thermal overload protector; three-phase are 230/460 V, 60 Hz.
Pedrollo PQA Series Turbine Pumps With Peripheral Impellers
This item is currently out of stock! 1" female NPT, non-self-priming peripheral turbine pump close-coupled to a PEDROLLO electric motor, totally enclosed fan cooled (TEFC), 1/2 HP, 3450 RPM, 2.6 Amps, 230 Volt, 1 Phase, 60 Hz. with capacitor and thermal overload protector
Pedrollo 1" female NPT, non-self-priming peripheral turbine pump close-coupled to a PEDROLLO electric motor, totally enclosed fan cooled (TEFC), 1/2 HP, 3450 RPM, 2.1/1.2 Amps, 230/460 Volt, 3 Phase, 60 Hz. Dimensions: 12 x 8 x 8" Weight: 15 lbs. with capacitor and thermal overload protector.