Pedrollo PQ Series Peripheral
Lateral Suction Turbine Pumps

The Pedrollo PQ Series(same as Pedrollo PQ60 European version) cast iron body, peripheral lateral suction turbine pumps have a flow rate of up to 24 GPM and heads to 328 feet (142 PSI) Suction lift up to 20 feet and will handle liquid temperatures up to 194 F. The have a cast iron body, bronze impeller and stainless steel shaft.

Construction: Pump Body: cast iron, with threaded ports; Body Back-plate: stainless steel AISI 304. Impellers: Brass, with radial peripheral vanes. Motor Shaft: stainless steel Mechanical Seal: ceramic - graphite - NBR. Motor: the pumps are close-coupled to a carefully matched PEDROLLO class F insulation electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. Electrical: Single-phase are 115 V or 230 V, 60 Hz with capacitor and thermal overload protector; three-phase are 230/460 V, 60 Hz.

Applications They are recommended for pumping clean water and liquids without abrasive particles and liquids that are chemically non aggresive to the materials from which the pump is made. THE HYDRAULIC CHARACTERISTICS OF THESE PUMPS, TOGETHER WITH THEIR COMPACTNESS, MAKE THEM SUITABLE FOR USE IN THE INDUSTRIAL SECTOR. The pumps must be installed in enclosed places, or at least protected against inclement weather

Pedrollo PQ Series Turbine Pumps With Peripheral Impellers
Model USA	Volts	HP	Ph.	Max. Amps	Wt. Lbs	Connections
PQm60	115	1/2	1	5.6	15	1" X 1"
PQm60-230	230	1/2	1	2.6	15	1" X 1"
PQ60	230/460	1/2	3	2.1/1.2	15	1" X 1"
PQm65	115	3/4	1	12	20	1" X 1"
PQm65-230	230	3/4	1	6	20	1" X 1"
PQ65	230/460	3/4	3	3.7/2.1	20	1" X 1"
PQm70	115	.85	1	11.3	30	1" X 1"
PQm70-230	230	.85	1	5.5	30	1" X 1"
PQ70	230/460	.85	3	3.8/2.2	30	1" X 1"
PQ80	230/460	1	3	3.8/2.0	30	1" X 1"
PQ100	230/460	1.5	3	6.5/3.2	40	1" X 1"
PQ200	230/460	2	3	7.0/4.2	40	1" X 1"
PQ300	230/460	3	3	10/4.8	40	1" X 1"