Little Giant "piggy back" diaphragm low level switch with 25' cord model RS-5-LL, 599019, converts any manual pump, up through 1/3 HP, to automatic. (Includes two Phillips drive screws and two cable ties).
Specifications:
Operation The switch is activated by pressure to a diaphragm which activates a switch providing power to the pump. Pressure to the diaphragm is caused by rising water around the switch housing.
Mounting:Replaces the complete switch assembly on the model 5-APCP Pool Cover Pumps. It Can also be attached directly to a model5-MSP (505025) Utility pump using the two slot drive screws provided. On 2"-3", Off: .50"-1.5".
Can be installed directly to a model 6-CIM-R (506274) sump pump housing using the two slot drive screws provided. On 3.5", Off 1.75" (+ or - .50").
Can be attached to a pipe with the cable ties provided to control any other pump up to 1/3 HP.
A 2" differential (+ or - .50")
Electrical: 115 volts, 1 phase, 60 Hz, up to 1/3 HP, 10.0 amps, 25 ft. power cord
Dimensions: 4-3/4" high, 3" long, 1-3/4" wide.
Weight: 2.5 lbs.