Agricultural Pumps

Agricultural Pumps

Agricultural products pumps. Simple, safe & accurate transfer of chemicals from drums, to tanks, to sprayers & barrels. Portable & barrel mounted 115 Volt & 12 DC pump systems. Suitability for the application should be determined by actual use and is the full responsibility of the customer. No warranty, expressed or implied, can be extended by the Manufacturers where failure is caused by chemical attack on pump materials. Temperature, aeration, concentration, and other factors may change the effect of the specific fluid on the pump materials. Data shown is based on the results at ambient temperatures, unless otherwise noted.


Flojet Pumps Agricultural Demand Pumps

Flojet pumps are commonly used on a variety of spot sprayers and small estate sprayers with a single fixed or adjustable tip wand. Frequently a spot sprayer and a small boom sprayer are combined on the same rig.

Pacer Plastic Piston Drum Pump - For Agricultural Chemicals # HPN-1A (C)

Pacer Plastic Piston Drum Pump - For Agricultural Chemicals # HPN-1A. Piston type polyester barrel pump for water & agricultural chemical applications. For liquids up to 2000 SSU (about the "thickness" of SAE 30 motor oil). 1 quart on every complete forward and backward cycle. Suction lift tested for 15 feet minimum. 3/4" X 8' EPDM, with polyester elbow and nozzle. Not for use with gasoline.

Plastic Rotary Polypropylene Drum Pump  For Chemicals  # RP-90P (D)

Plastic Rotary Drum Pump For Chemicals # RP-90P, Plastic Rotary Chemical Pump: Glass-filled polypropylene pump with Ryton Vanes and Teflon seal, has exceptional chemical resistance. It is suitable for dispensing petroleum products, many acid and alkali solutions, water and water based chemicals. Hand crank rotary action.Not for use with gasoline. The RP-90P has been replaced by AMT 4946-99

Plastic Rotary Polypropylene Drum Pump  For Chemicals  #  4946-99  (C)

AMT Plastic Rotary Polypropylene Drum Pump For Chemicals # 4946-99 is designed for the transfer of many organic acids, alcohols and other water soluble inorganic chemicals which are compatible with the pump's component materials. Glass-filled polypropylene pump with Ryton vanes and rods and Teflon seals, has exceptional chemical resistance. It is suitable for dispensing petroleum products, many acid and alkali solutions, water and water based chemicals. Hand crank rotary action. Replaces the RP-90P Pump and the GPM-PMP-109932 chemical pumps

Plastic Rotary Ryton Drum Pump  For Aggresive Chemicals RP90R <br>

Plastic Rotary Ryton Drum Pump For Many Aggresive Chemicals RP90R: Ryton body pump with Ryton vanes, Viton shaft seal and Teflon flange seal has exceptional chemical resistance. It is suitable for dispensing petroleum products, many aggresive chemicals such as chlorinated solvents, aromatic and aliphatic hydrocarbons, antifreeze, methanol, benzene, diesel fuel, biodiesel, vegetable oil, water and water based chemicals. Hand crank reversible rotary action. Not for use with gasoline, ketones, ethers and very strong oxidizing agents in concentrated form.

Pacer Plastic Engine Driven Self Priming Pump (C) <br>

Pacer corrosion resistant gasoline engine driven self priming 2" and 3" plastic water pump with gasoline engines. Suitable for water (clean or dirty) and many agricultural chemicals, such as Nitrogen, Roundup, Atrazine and many other chemicals. Self-priming to 20 feet.

MP Pumps Chemflo Stainless Steel Pumps

MP Pumps Chemflo 1,2,3 & 4, 316 SS Centrifugal Pumps. Investment cast, 316SS is stronger than stamped/formed 304, offering more corrosion resistance than 304, increasing service life and application flexibility, plus Chemflo protects against extreme pH and temperature. Viton shaft seals for continuous duty. Require 56C face electric motors. Available in 1-1/2"x1" and 2"x1-1/2" NPT.

MP Pumps Agricultural Chemflo Pumpak 316 Stainless Steel Pumps<br>

MP Pumps Chemflo Pump Pumpak (Less Motor) in 1-1/2", 2" and 3" pipe sizes. Investment-Cast, 316 Stainless Steel is Stronger than Stamped / Formed 304SS. These pumps include only the PumpPak, they do not include the electric motor. Standard pumps fitted with viton mechanical seals.

MP Pumps Flomax  8 Stainless Steel

MP Pumps Flomax 8, 2" NPT Flomax self priming centrifugal pumps. Up to 140 GPM, up to 40 PSI (92'), 3450 RPM. Available in cast iron, all bronze and 316 SS construction. Close coupled, long coupled and in PumPaks less motors.

MP Pumps FRX Series 316 Stainless Steel<br>

The FRX50, FRX75, FRX75-SP and FRX100 are a high performance stainless steel pump making it ideal for marine, commercial, or industrial transfer application of compatible fluids. Available in 1/2", 3/4", and 1" NPT Ports. All pumping parts are 316SS for superior corrosion resistance when pumping chemical compounds.

Questions & Answers

Ask a question about Agricultural Pumps. Click here
Customer Reviews



About Us Contact Us Customer Reviews Facebook Twitter Disclaimers Privacy Policy Returns Shipping Policy Terms of Sale Terms of Use Warranty FAQ Site Map Technical Info Terminology Troubleshooting
  • Internet prices apply only to Internet purchases.
  • Minimum order amount is $20.00.
  • All merchandise listed is in stock.
  • Orders are shipped the next business day.
  • We only sell within the 48 adjacent United States.
  • Shipping tracking numbers are e-mailed automatically.
  • Office hours are: Mon - Fri, 8am - 4:30pm EST excl. holidays.
Copyright © 2024 All Rights Reserved.