Your First Choice for Pumps and Pump Systems
Call Icon Call (305)-754-0677 M-F 8am - 4pm EST | Contact | FAQ

Plastic Rotary Ryton Drum Pump For Aggresive Chemicals RP90R (D)

Plastic Rotary Ryton Drum Pump  For Aggresive Chemicals RP90R <br>

The RP-90P has been replaced by AMT 4642-99

Order AMT 4642-99

Plastic Rotary Ryton Drum Pump For Aggresive Chemicals RP90R: Ryton body pump with Ryton vanes, Viton shaft seal and Teflon flange seal has exceptional chemical resistance. It is suitable for dispensing petroleum products, many aggresive chemicals such as chlorinated solvents, aromatic and aliphatic hydrocarbons, antifreeze, methanol, benzene, diesel fuel, biodiesel, vegetable oil, water and water based chemicals. Hand crank reversible rotary action. Not for use with gasoline, ketones, ethers, nitric acid over 50% and very strong oxidizing agents in concentrated form.

Suitability for the application should be determined by actual use and is the full responsibility of the customer. No warranty, expressed or implied, is extended by the manufacturer where failure is caused by chemical attack on pump materials. Temperature, aeration, concentration, and other factors may change the effect of the specific fluid on the pump materials. Data shown is based on the results at ambient temperatures, unless otherwise noted.

Specifications

Applications: Suitable for dispensing petroleum products, aggressive chemicals such as chlorinated solvents, aromatic and aliphatic hydrocarbons, antifreeze, methanol, benzene, diesel fuel, biodiesel, vegetable oil, water and water based chemicals. Components:Pump head, handle and knob assembly, strainer for suction tube. 3-part suction tube and discharge spout. Construction: Ryton discharge spout, front & rear casings, vanes, rotor, handle, suction tubes and strainer; Viton shaft seal; Teflon flange seal; Hastelloy spring; Polyethylene bung adapter. Fits: 30 gallons to 55 gallon barrels. Inlet: Tapped female BSP (British Standard Pipe) for the included 1" male BSP suction tube. Outlet: Tapped female BST (British Standard Pipe) for the included 3/4" male BSP spout. Suction tube: Three piece Ryton 1" x 47" Barrel adapter:2" Polyethylene bung adapter included. Capacity: 1 Gallon per 16 revolutions. Viscosity: For liquids up to 2000 SSU (about the "thickness" of SAE 30 motor oil). Carton dimensions: 15" high X 7" wide x 6" long. Weight: 5 lbs

Questions & Answers

Although this pump is suitable for many liquids, It is not suitable for all liquids. Pump should only be used with liquid compatible with pump components. Consult Chemical Compatibility Charts against the pumps specifications. Also the fertilizer supplier should be consulted regarding any questions of chemical compatibility, proper and safe handling of chemicals
Suitability for the application should be determined by actual use and is the full responsibility of the customer. No warranty, expressed or implied, is extended by the manufacturer where failure is caused by chemical attack on pump materials. Temperature, aeration, concentration, and other factors may change the effect of the specific fluid on the pump materials. Data shown is based on the results at ambient temperatures, unless otherwise noted.

(?) Ask a question about Plastic Rotary Ryton Drum Pump For Aggresive Chemicals RP90R
Back to Top