MP Pumps Flomax 8 Pumpak 2" NPT (Liquid End Less Motor)

Flomax 8 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 56C NEMA motors less feet or 184C/145TC NEMA motors with feet. PumPaks are provided less motors and with 5" maximum impeller diameters.

Specifications

Rated Capacity 140 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal. Motors: Pump water end only less motors Motors Required: 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required: 56C NEMA motors less fit or 184C/145TC NEMA motors with feet

Pump Capacity - MP Pumps Flomax 8 Self Priming Pumps At 0 Suction Lift, 3600 RPM
Required Motor HP	Required Impeller Trim	Capacity At Total Dynamic Head In Feet								Shut Off
		20'	30'	40'	50'	60'	70'	80'	90'
		Gallons Per Minute (GPM)
1-1/2	4.10"	105	85	60	20	-	-	-	-	54'
2	4.62"	127	110	90	70	45	15	-	-	74'
3	5.0"	150	140	120	100	80	60	40	15	96'