Call (305)-754-0677
MP Pumps Flomax 5 Pumpak 1-1/2" NPT (Liquid End Less Motor)
Flomax 5 Pumpaks are liquid-ends less power source. Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Available in cast iron and all bronze construction and will fit 56C NEMA motors less feet or 184C/145TC NEMA motors with feet. PumPaks are provided less motors and with 5" maximum impeller diameters.
Specifications
Rated Capacity 100 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal. Motors: Pump water end only less motors Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required 56C NEMA motors less fit or 184C/145TC NEMA motors with feet
| Pump Capacity - MP Pumps Flomax 5 Self Priming Pumps At 0 Suction Lift, 3600 RPM |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Required Motor HP |
Required Impeller Trim |
Capacity At Total Dynamic Head In Feet | Shut Off |
|||||||||
| 20' | 30' | 40' | 50' | 60' | 70' | 80' | 90' | |||||
| Gallons Per Minute (GPM) | ||||||||||||
| 1-1/2 | 4.10" | 105 | 85 | 60 | 20 | - | - | - | - | 54' | ||
| 2 | 4.62" | 127 | 110 | 90 | 70 | 45 | 15 | - | - | 74' | ||
| 3 | 5.0" | 150 | 140 | 120 | 100 | 80 | 60 | 40 | 15 | 96' | ||
Resources
Questions & Answers
Ask a question about MP Pumps Flomax 5 Pumpak 1-1/2" NPT (Liquid End Less Motor) 
